For Better Performance Please Use Chrome or Firefox Web Browser

Prof. Arjomand Mehrabani-Zeinabad

Professor of Chemical Engineering Department

Welcome to Prof. Arjomand Mehrabani-Zeinabad

No front page content has been created yet.

Office : Department of Chemical Engineering, Isfahan University of Technology, Isfahan, Iran - Postal Code : 84156-83111 Email : arjomand@iut.ac.ir Phone : +98-31-33915609 Fax : +98-31-33912677 Web Site : Prof. Mehrabani-Zeinabad Research Fields : Modelling, Simulation & Control

Industrial Water & Waste Water Treatment

Environmental Protection

Teaching

Recent Publications

Yolk@Wrinkled-double shell smart nanoreactors: new platforms for mineralization of pharmaceutical wastewater

Investigating the potential of microbial enhanced oil recovery in carbonate reservoirs using Bacillus persicus

Rational design and synthesis of 3D nanoreactors for green fuel production: Design band gap Y@DS photocatalyst under visible irradiation

Developing a new algorithm to design thermo-vapor compressors using dimensionless parameters: A CFD approach

Photocatalytic activity of ZrO2/TiO2/Fe3O4 ternary nanocomposite for the degradation of naproxen: characterization and optimization using response surface methodology

Synthesis of Fe–TiO2/Al2O3 nanocatalyst for photocatalytic reduction of nitrate ion from aqueous solution under visible light and UV irradiation

Photocatalytic degradation of Direct Red 16 dye under visible light irradiation using Fe-doped TiO2/Al2O3 nanocatalyst: experimental design and optimization using a central composite design

Single-bubble EHD behavior into water two-phase flow under electric-field stress and gravitational acceleration using PFM

A comprehensive modeling approach for determining the role and nature of interfacial morphology in mixed matrix membranes

Core@Wrinkled-Shell architectural photocatalyst: New method for use of semiconductors in the visible light range

A study on the effects of feed temperature and concentration on design of a multi-stage pervaporation system for isopropanol-water separation using commercial available modules with inter-stage heating

Development of a continuous fixed–bed column to eliminate cadmium(II) ions by starch-g-poly(acrylic acid)/cellulose nanofiber bio-nanocomposite hydrogel

Parallel implementation of coupled phase equilibrium-mass transfer model Efficient and accurate simulation of fractured reservoirs

Synthesis, characterization, and evaluations of Cu-doped TiO2/Bi2O3 nanocomposite for Direct red 16 azo dye decolorization under visible light irradiation

Determination of maximum possible contribution of porous particles in gas transport properties of their corresponding mixed matrix membranes

Characterization of the polymer/particle interphase in composite materials by molecular probing

Mathematical modeling of temperature and pressure effects on permeability, diffusivity and solubility in polymeric and mixed matrix membranes

The role of interfacial morphology in the gas transport behavior of nanocomposite membranes: A mathematical modeling approach

SO2 removal from gas streams by ammonia scrubbing: Process optimization by response surface methodology

Influence of CO2 residual of a regenerated amine on the performance of natural gas sweetening processes using alkanolamine solutions

Sensitivity analysis pertaining to effective parameters on electrohydrodynamic drying of porous shrinkable materials

Optimization of the performance, operation conditions and purge rate for a dead-ended anode proton exchange membrane fuel cell using an analytical model

Modeling and simulation of non-isothermal pervaporation process for separation of isopropanol-water mixture

Copper removal by filamentous and yeast-like morphologies of Mucor indicus: surface characterization and biosorption mechanis

Modeling of both temperature and pressure dependency of permeability through membranes

A novel strategy for estimation of interface characteristics parameters for polymer chain rigidification morphology in mixed matrix membranes

Permeability prediction of mixed matrix membranes containing core-shell particles through mathematical modeling

Synthesis and characterization of Fe-doped TiO2/Al2O3 catalyst for degradation of direct red 16 dye by visible light irradiation

Synthesis and characterization of Cu-doped TiO2/Bi2O3 photocatalyst for degradation of direct red 16 dye under visible light irradiation

Enhancement of nutrient removal by a hybrid five-stage bardenpho and moving bed biofilm reactor process

Recently developed heat pump assisted distillation configurations: A comparative study

Distillation without hot utilities; development of novel distillation configurations for energy and costs saving for separation of propylene/propane mixture

Evaluation of a novel configuration of bottom flashing on dual distillation columns for saving energy

Recognition of polymer-particle interfacial morphology in mixed matrix membranes through ideal permeation predictive models

Evaluation of the performance of heat pump-assisted distillation of an ethanol–water mixture

Development of a novel processing system for efficient sour water stripping

Post combustion carbon capture: Does optimization of the processing system based on energy and utility requirements warrant the lowest possible costs?

Modeling, simulation, and thermally optimization of thermally-coupled distillation columns

Comprehensive study on interactive effects of operational parameters by using response surface method for sodium sulfate removal from magnesium stearate aqueous slurry via electrodialysis process

Evaluation of different vapor recompression distillation configurations based on energy requirements and associated costs

Synergy between two natural gas sweetening processes

Treatment of Z1 oily industrial wastewater by electrocoagulation using aluminum electrodes

Application of electrocoagulation erocess by Fe electrodes in treatment of industrial wastewater containing Z1 oil

A study on biosorption of copper ions by fungal chitosan: An alternative to shrimp chitosan

Insights to the modeling of polymer-particle interfacial characteristics in nanocomposite membranes for transport of gas molecules

Copper removal using different fungal-based adsorbents: A comparative and detailed Study, J. of Dispersion Sci. and Tech

Comparison of operational performances and economical evaluations of DGA and MDEA gas sweetening processes

Recovery of lithium ions from sodium-contaminated lithium bromide solution by using electrodialysis process

Adsorption of hexavalent chromium by chitosans with different molecular weights

An experimental study on bioremediation and photolysis of Enrofloxacin

Mathematical modeling of PCM-integrated wall

An experimental investigation into the reusing sodium contaminated lithium bromide solution and recovery of lithium ions by using electrodialysis method

Improvement of cadmium ion electrochemical removal from dilute aqueous solutions by application of multi-stage electrolysis

The effects of operational parameters on the electrochemical removal of cadmium ion from dilute aqueous solutions

Effect of applied EHD on in-tube condensation of R-134a within an assembled experimental rig including a laboratory heat exchanger

Construction of composite polymer bipolar plate for PEM fuel cell

Thermal performance analysis of nanofluids in a thermosyphon heat pipe using CFD modeling

Numerical simulation of electrohydrodynamic effect on natural convection through a vertical enclosure channel

Optimization of draft tube position in a spouted bed reactor using response surface methodology

An experimental investigation into batch electrodialysis process for removal of sodium sulfate from magnesium stearate aqueous slurry

Construction of composite polymer bipolar plate for PEM fuel cell

Optimization of draft tube position in a spouted bed reactor using response surface methodology

Comparison between backstepping and input-output linearization techniques for pH process control

Effect of contact angle on steam dropwise condensation: A simulation approach

Lead biosorption from aqueous solution by filamentous fungus Mucor indicus

Mathematical Method for Generating a lot of Virtual Data from Limited Number of Real Data in Industrial Plants

Modeling, Simulation and Optimization of Catalytic Naphtha Reforming Unit and Proposing a Model for RONC

Experimental Study of Batch Electrodialysis Process in Separation of Sodium Sulfate from Magnesium Stearate Aqueous Slurry

Comparing performance of automotive lead acid batteries: Application of Na2SO4 in negative and positive electrodes paste

Dynamic Behavior of Nucleation in Supercritical N2 Foaming of Polystyrene_Aluminum Oxide Nanocomposite

The synergistic existence of SiO2 and TiO2 Nanoparticles in Polystyrene Nanocomposite

Visual observation of production of polystyrene-aluminum oxide nanocomposite structural foam

Application of data reconciliation on closed-loop response of a distillation column

Effect of using Na2SO4 additive on the performances of automotive lead acid battery

Rheological Modeling of Fracture in Plug-Assisted Vacuum Thermoforming

Construction of composite polymer bipolar plate for fuel cell

Study of thermal and rheological behaviour of polystyrene/TiO2 polystyrene/SiO2/TiO2 and polystyrene/SiO2 nanocomposite

Removal of organic pollution from wastewater: A condensed review on electrochemical methods

Coating of Polymeric Substrate Catalysts on Metallic Surfaces

Preparation of polystyrene/SiO2, polystyrene/SiO2/TiO2 & polystyrene/TiO2 nanocomposites based on a novel solution method and characterization of their structural and mechanical properties

Reduction of Ammonia from Air Stream: An Experimental Study

Nitrate removal from water and wastewater: A condensed review on methods

Removal of Ammonia from Air Stream: Modeling of A Biofilter

Water quality problems in Iran: A brief survey

Preparation of polystyrene/SiO2, polystyrene/SiO2/TiO2 and polystyrene/TiO2 nanocomposites based on a solution method and characterization of their structural and mechanical properties

Simulation and experimental validation on distillation columns’ perfomance: trays versus structured packings

On-Line Nonlinear Dynamic Data Reconciliation Using Extended Kalman Filtering: Application to a Distillation Column and a CSTR

Study of Using Data Reconciliation on Response of Close-loop Systems

Coating of a Polymeric Catalyst onto a Metalic Substrate by Adhesion Promoters

Effect of Electrohydrodynamic (EHD) on Condensation of R-134a in Presence of Non-Condensable Gas

Dynamic Characteristics of Plug-Assist Thermoforming Process

Determination of Polymeric Medium Flow Rate in Extruders Based on a New Correlation

A Study of Performance Improvement in Closed-Loop Systems by Reconciliation of Process Data

Data Reconciliation: Development of an Object-Oriented Software Tool

Adaptive Feedback Linearization Control of pH

Extraction of chromium ion (VI) using bulk liquid membrane

Adaptive pH Control with Input-Output Linearization

Comparison between Backstepping and Input-Output Linearization Techniques for pH Process Control

Electrohydrodynamically Induced Enhancement of Vapour Condensation Heat Transfer in Presence of A Non-Condensable Gas

SSDR: An Object Oriented Steady-State Data Reconciliation Software

Effect of electrohydrodynamic (EHD) on condensation in presence of non-condensable gas

On-line Nonlinear Dynamic data Reconciliation using Extended Kalman Filtering: Application to a Distilliation Column

Batch Processing of Poly(ethene terephthalate)-Based Masterbatches: The Effect of Carrier Molecular Weight and Pigment Concentration

Hydrolytic Degradation of Poly(Ethylene Terephthalate)

A Solution for Warpage in Polymeric Products by Plug-Assisted Thermoforming

Verifying validity of vapor-phase ideality assumption for reactive system of acetic acid (1)+ethanol (2)+ethyl acetate (3)+water (4) at 1atm

Rheological Modeling of Plug-Assist Thermoforming

Modeling of Deformation Processes in Vacuum Thermoforming of a Pre-Stretched Sheet

Integration of FCCU in petroleum refinery

Investigation of pigment distribution in masterbatches by implementation of three rheological models

Chemical reaction effects study on liquid-vapor equilibrium in simulation results of reactive distillation column

Modelzas: An Object-Oriented Computer-Aided Modeling Environment

Dynamic Simulation of Reactive Distillation Columns Using the Equillibrium Stages Model

Performance of a fuzzy logic controller in control of a methanol-water distillation column

Simulation and control of a methanol-water distillation column implementing a fuzzy logic controller

Synthesizes of Ion-Exchange Resins as MTBE Production Catalys

Dynamic Simulation of Reactive Distillation Columns

Modeling and Simulation of Dimerization Reactor for the Selective Production of Butene-1

Synthesizes of Ion-Exchange Resins as MTBE Production Catalyst

Recovery of used strong cationic ion-exchange resins

Non-Linear Parameter Estimation of Distillation Column

System Identification of A Distillation Column

SimChemPro: An Object-Oriented Environment for Modeling and Simulation

Structural Catalytic Packing for Reaction-Distillation Colums

Optimum using from solid materials of Clarifiers

Prof. Arjomand Mehrabani-Zeinabad | Professor of Chemical Engineering Department

Error

The website encountered an unexpected error. Please try again later.